For light soiling. Place approx. 400 ml of water and a little washing-up liquid in the cooking space and select the cleaning program. The environmentally friendly cleaning system softens burnt-in residues, making them much easier to wipe off afterwards
Note: Some of these example videos show equipment that is not included in the scope of delivery of this device. Please make sure of this using the item description below.
Special features of the Falmec Flipper wall hood:
- falmec-Mirabilia
Extractor hoods in a new light
In the Mirabilia series, extractor hoods are decorative and multifunctional, highlighting the properties of light without compromising the efficiency of a hood. Designed to fuse light, glass and steel together. The new Mirabilia with LED lighting will be added to the existing range of incandescent and halogen lamps. The LED lights are used both as hob lighting and for ambient lighting. The advantage of this new technology is an almost complete elimination of power consumption for light sources. In addition, the white LEDs improve the “purity of the glass”, creating a pleasant and modern effect. - falmec motors Falmec offers a wide range of motors depending on your needs. In addition to the aspect of efficiency, special attention is also paid to reducing noise in order to achieve greater comfort in the kitchen.
- falmec LED lighting The new LED lights are characterized by good illumination, low energy consumption (1 watt) and a long service life.
- falmec-ASPPER edge extraction
The rising vapor is extracted from the outer edges of the hood body construction and directed to the grease filter behind it. Due to the high flow speed at the edge of the extractor hood, almost no cooking fumes can escape into the kitchen, even with lower motor settings. There are no turbulences, the drag effect is high and rebound effects play no role. The air does not flow into the kitchen, but directly into the extractor hood. The increase in efficiency resulting from edge extraction enables operation at lower power levels, with less energy consumption and lower noise.
- falmec-AISI 304 AISI 304 steel is a high-quality material that can be called "real" stainless steel thanks to the nickel alloy.
Features Falmec Flipper wall hood:
- Installation: Wall hood
- Material: High-quality, brushed stainless steel (AISI 304) / fronts tempered glass, satin finish
- Edge extraction with noise-insulating cover plate
- LED lighting
- Ambient light LED, dimmable
- 4 power level electronics
- Metal grease filter, dishwasher safe
- Motor can be rotated to enable rear exit
- Operation only possible with the front flap open!
Technical information about the Falmec Flipper wall hood :
- Motor and control: 800 m³/h P.EL. 4 levels
- 4 performance levels:
Performance level 1:
Noise level according to I.E.C. 60704-2-13 in dB (A) re 1pW : 46
Air output (m³/h) according to I.E.C. 61591:295
Air pressure (Pa): 390
Consumption (W): 130
Exhaust air connection: Ø 150 mm
Performance level 2:
Noise level according to I.E.C. 60704-2-13 in dB (A) re 1pW : 53
Air output (m³/h) according to I.E.C. 61591:390
Air pressure (Pa): 440
Consumption (W): 150
Exhaust air connection: Ø 150 mm
Performance level 3:
Noise level according to I.E.C. 60704-2-13 in dB (A) re 1pW : 58
Air output (m³/h) according to I.E.C. 61591: 500
Air pressure (Pa): 490
Consumption (W): 178
Exhaust air connection: Ø 150 mm
Performance level 4:
Noise level according to I.E.C. 60704-2-13 in dB (A) re 1pW : 66
Air output (m³/h) according to I.E.C. 61591: 750
Air pressure (Pa): 510
Consumption (W): 224
Exhaust air connection: Ø 150 mm - Energy efficiency class: A
- Lighting LED: 2 x 1.2 W
- Filter:
Metal grease filter "BASE"
Carbon filter type C (optionally available)
- Minimum distance from the hob: 52 cm
- Operation only possible with an open front flap
The manufacturer offers a 5-year guarantee throughout Germany on the delivered item Falmec pinball, design, glass/white satin, 55 cm, wall hood. If material or manufacturing defects occur during this period, the manufacturer will provide one of the following services at its discretion under the guarantee:
• Repair of the item Falmec Flipper, design, glass/white satin, 55 cm, wall hood or
• Exchange for an equivalent or new item Falmec Flipper, design, glass/white satin, 55 cm, wall hood (possibly also a successor model).
In the event of a warranty claim, please contact:
FALMEC Germany GmbH
Industriestrasse 14
91325 Adelsdorf
Tel: +49 (0) 9195 / 922810
Fax: +49 (0) 9195 / 9228181
Note:
Your statutory warranty rights towards us remain unaffected. If the purchased item is defective, you can contact us in any case, regardless of whether the warranty case occurs and whether the warranty is claimed or not.
