For light soiling. Place approx. 400 ml of water and a little washing-up liquid in the cooking chamber and select the cleaning program. The environmentally friendly cleaning system softens burnt-in residues, making them much easier to wipe off afterwards

• for base cabinet from 60 cm
• Color: Slate (matt)
  
• Material: Ceramic
  The special resistance of KeraDomo kitchen ceramics, as a sister product to laboratory ceramics, makes them the ideal material for all areas that have to meet extreme demands. The fine stoneware fired at over 1,200°C owes its high material density and resilience to the company's experience as a provider of sophisticated laboratory equipment
• 1 basin, 1 shelf (basin on the right or basin on the left)
  
• not reversible

  reversible means: the sink can be installed both left and right; d. H. You can decide for yourself whether you want the draining tray to be on the right or left side.

  installable
  
• this sink can only be installed as a flush sink (thus only in combination with stone or granite worktops); Installation as a built-in or overlay sink or use as an undercounter sink is not possible! However, there is a sister version of this model that is intended for installation
• The delivery condition of the sink includes a hole for the fitting . There are no predetermined breaking points; One or more drill holes can only be made at the manufacturer Systemceram's factory. Please tell us exactly the position you want on the sink, preferably in a separate email, or contact us about this. Please also note that through this personal positioning of the hole drilling, you are ordering and purchasing an item that is individualized for you and is made specifically for you. This individualization and the associated inability for us to sell elsewhere may result in the right of withdrawal, which expressly excludes individualized products, not becoming effective. (Of course, this has no influence on a complaint related to product defects). Please speak to us about this if necessary.
• High shock, impact and scratch resistance
• Tasteless and odorless
• Chemical resistant to common acids and alkalis
• Heat and cold resistant
• Lightfast - no fading of the colors
• Drain fitting with eccentric actuation

  The filling and draining of the sink is done using a round rotary knob on the top of the sink. This toggle, called the eccentric actuation, closes or opens the sink drain, depending on which direction it is turned. This eliminates the need to dip into the rinse water.

  (surcharge, see option)
• With Systemceram-CleanPlus surface sealant upon request

  limescale and dirt cannot adhere to a CleanPlus sealed surface. If all care instructions are followed, this special surface protection will last for a long time. Detergent or mild vinegar and all-purpose cleaners are sufficient for cleaning. Aggressive and abrasive cleaning agents can destroy the CleanPlus properties and scratch the glaze.

  (surcharge, see option)
• Cut-out dimensions in the APL: width 830 x depth 480 mm
  
• Attention: With integrated. GS or rotating carousel, minimum APL thickness 30 mm

Options to be selected (please select these at the top right, next to the article photo):

• Surface option : Here you can choose whether you want the sink with or without the Clean-Plus surface sealing
• Equipment option: "Drain set with manual operation", "Drain set with eccentric actuation" or "Drain set with premium eccentric
  Systemceram retractable eccentric actuation
  
  actuation (rotary knob)" : You can choose here Whether you want to close and open the water drain by hand (manual operation) or more conveniently using a round, shiny rotary knob on the top of the sink (drain fitting with eccentric actuation) or a retractable stainless steel rotary knob (drain fitting with premium eccentric actuation).
  
• Hole drilling option: If you would like the additional hole drilling to be made at the factory by the manufacturer for safety reasons, please select this option. For this we need the numbers/positions of the tap hole(s) that Systemceram should drill for you. For the sink version with manual operation you need 1 tap hole (already present at the factory) for the fitting; for the version with eccentric operation you need 2 hole holes (faucet and eccentric operation). Please note the dimensional drawings shown below, as the positions of the hole holes in reversible sinks can be different for the bowl left and bowl right versions.
  
• Specification of the hole drilling positions: At the end of your ordering process on our website (at the very bottom of the ordering step of the payment method selection) you will find a comments field below. Please tell us the position numbers there. If you miss this window, please feel free to send us an email to info@ascasa.de. We will of course complete your order accordingly before it is processed further.

Included in delivery according to the selected option:

• Drain fitting with manual operation
  
• without Systemceram CleanPlus sealing
  
• 1 hole for fitting as standard

* Information on the manufacturer's guarantee

Note for international and cash on delivery orders / Note for orders from other countries: