For light soiling. Place approx. 400 ml of water and a little washing-up liquid in the cooking space and select the cleaning program. The environmentally friendly cleaning system softens burnt-in residues, making them much easier to wipe off afterwards
Systemceram KeraDomo MERA MIDDLE in slate (matt). INCLUDING 5 YEAR MANUFACTURER WARRANTY! * (Conditions Manufacturer's Warranty)
Equipment:
- for base cabinet from 50 cm
- Color: Slate (matt)
- Material: Ceramic
The special resistance of KeraDomo kitchen ceramics, as a sister product to laboratory ceramics, makes them the ideal material for all areas that have to meet extreme demands. The fine stoneware fired at over 1,200°C owes its high material density and resilience to the company's experience as a provider of sophisticated laboratory equipment - 1 basin
- This sink can only be installed as a built-in or overlay sink; Flush installation or use as an undermount sink is not possible!
- The delivery condition of the sink includes pre-punched holes (standard pre-drilling); The top of the sink is closed and must be pierced on site at the marked points.
- Cutout dimensions in the APL: width 1,030 x depth 480 mm (more details on www.systemceram.de)
- Attention: With integrated. GS or rotating carousel minimum APL thickness 30 mm
- High shock, impact and scratch resistance
- Tasteless and odorless
- Chemical-resistant to common acids and alkalis
- Heat and cold resistant
- Lightfast - no fading of the colors
Options to be selected (please select these at the top right, next to the article photo):
- Surface option: Here you can choose whether to use the sink with or without the surface sealing Systemceram-CleanPlus
limescale and dirt cannot hold on to a CleanPlus sealed surface. If all care instructions are followed, this special surface protection will last for a long time. Detergent or mild vinegar and all-purpose cleaners are sufficient for cleaning. Aggressive and abrasive cleaning agents can destroy the CleanPlus properties and scratch the glaze.
wish - Option equipment: "drain fitting with manual operation", "drain fitting with eccentric operation
The sink is filled and drained using a round rotary knob on the This knob, called the eccentric actuation, closes or opens the sink drain, depending on which direction it is turned. This eliminates the need to reach into the rinsing water.
" or " waste set with premium eccentricSystemceram retractable eccentric actuation
.actuation (rotary knob)" : Here you can choose whether you want to close and open the water drain by hand (manual actuation) or more conveniently using a round, shiny rotary knob on the top of the sink (drain fitting with eccentric actuation ) or a retractable stainless steel rotary knob (drain fitting with premium eccentric actuation).
- “Hole drilling by manufacturer” option: If you would like the hole drilling to be made at the factory by the manufacturer for safety reasons, please select this option. For this we need the numbers/positions of the tap hole(s) that Systemceram should drill for you. For the sink version with manual operation you need 1 tap hole for the fitting; for the version with eccentric operation you need 2 hole holes (faucet and eccentric operation). Please note the dimensional drawings shown below, as the positions of the hole holes in reversible sinks can be different for the bowl left and bowl right versions.
- Indication of the hole drilling positions: At the end of your ordering process on our pages (at the very bottom of the ordering step of the payment method selection) you will find a comments field below. Please tell us the position numbers there. If you miss this window, please feel free to send us an email to info@ascasa.de. We will of course complete your order accordingly before it is processed further.
Included in delivery according to the selected option:
- Drain fitting with manual operation
- without Systemceram CleanPlus sealing
- top of sink closed
Note: if you can see a round rotary knob on the sink in the product image above, this is the version with eccentric actuation. Any fitting shown is not included in the scope of delivery.
Special accessories (selectable):
- Drain fitting with eccentric actuation (surcharge)
- On request with CleanPlus surface sealing (surcharge); Systemceram-CleanPlus
* Information about the manufacturer’s warranty
The manufacturer offers a 5-year guarantee throughout Germany on the delivered item Systemceram KeraDomo Mera Middle. If material or manufacturing defects occur during this period, the manufacturer will provide one of the following services at its discretion under the guarantee:
• Repair of the item Systemceram KeraDomo Mera Middle or
• Exchange for an equivalent or new item Systemceram KeraDomo Mera Middle (possibly also a successor model).
In the event of a warranty claim, please contact:
Systemceram GmbH & Co. KG
Berggarten 1
56427 Siersheim
Tel: +49 (0) 2623 / 600-10
Fax: +49 (0) 2623 / 600-790
Note:
Your statutory warranty rights towards us remain unaffected. If the purchased item is defective, you can contact us in any case, regardless of whether the warranty case occurs and whether the warranty is claimed or not.
Note for foreign and cash on delivery orders / Note for orders from other countries:
Due to the transport sensitivity of this item, we can only send shipments abroad or cash on delivery orders on a pallet via a shipping company. In this case, we ask you to contact us before placing your order (Email: info@ascasa.de, Tel. +49 (0) 89 / 9616069-00).
Due to the transport-sensitivity of this article we can only make shipments abroad on a pallet via a trucking company. We ask you to contact us in this case before submitting your order (Email: info@ascasa.de , Tel. +49 (0) 89 / 9616069-00).
