For light soiling. Place approx. 400 ml of water and a little washing-up liquid in the cooking space and select the cleaning program. The environmentally friendly cleaning system softens burnt-in residues, making them much easier to wipe off afterwards
Systemceram KeraDomo MERA 24 F in sand (matt), with a 5-year guarantee. INCLUDING 5 YEAR MANUFACTURER WARRANTY! * (Conditions Manufacturer's Warranty)
Equipment:
- for base cabinet from 30 cm
- Color: Sand (matt)
- Material: Ceramic
The special resistance of KeraDomo kitchen ceramics, as a sister product to laboratory ceramics, makes them the ideal material for all areas that have to meet extreme demands. The fine stoneware fired at over 1,200°C owes its high material density and resilience to the company's experience as a provider of sophisticated laboratory equipment - 1 basin (not lockable)
- Manual operation
- This sink can only be installed as a flush sink (thus only in combination with stone or granite worktops); Installation as a built-in or overlay sink or use as an undercounter sink is not possible! However, there is a sister version of this model that is intended for installation
- High shock, impact and scratch resistance
- Tasteless and odorless
- Chemical-resistant to common acids and alkalis
- Heat and cold resistant
- Lightfast - no fading of the colors
Options to be selected (please select these at the top right, next to the article photo):
- Surface option : Here you can choose whether you want to clean the sink with or without the surface sealing. Plus wish
- Hole drilling option: If you would like the additional hole drilling to be made at the factory by the manufacturer for safety reasons, please select this option. For this we need the numbers/positions of the tap hole(s) that Systemceram should drill for you. For the sink version with manual operation you need 1 tap hole for the fitting, for the version with eccentric operation
The sink is filled and drained using a round rotary knob on the top of the sink. This toggle, called the eccentric actuation, closes or opens the sink drain, depending on which direction it is turned. This eliminates the need to reach into the rinse water. You need 2 holes (fitting and eccentric control). Please note the dimensional drawings shown below, as the positions of the hole holes in reversible sinks can be different for the bowl left and bowl right versions.
- Specification of the hole drilling positions: At the end of your ordering process on our website (at the very bottom of the ordering step of the payment method selection) you will find a comments field below. Please tell us the position numbers there. If you miss this window, please feel free to send us an email to info@ascasa.de. We will of course complete your order accordingly before it is processed further.
Included in delivery according to the selected option:
- Drain fitting with manual operation
- without Systemceram-CleanPlus
Limescale and dirt cannot adhere to a CleanPlus sealed surface. If all care instructions are followed, this special surface protection will last for a long time. Detergent or mild vinegar and all-purpose cleaners are sufficient for cleaning. Aggressive and abrasive cleaning agents can destroy the CleanPlus properties and scratch the glaze.
-Sealing
Special accessories (selectable):
- On request with CleanPlus surface sealant (surcharge); Systemceram-CleanPlus
- The delivery condition of the sink does not include a hole for the fitting. There are no predetermined breaking points; One or more drill holes can only be made at the manufacturer Systemceram's factory. Please tell us exactly the position you want on the sink, preferably in a separate email, or contact us about this. Please also note that through this personal positioning of the hole drilling, you are ordering and purchasing an item that is individualized for you and is made specifically for you. This individualization and the associated inability for us to sell elsewhere may result in the right of withdrawal, which expressly excludes individualized products, not becoming effective. (Of course, this has no influence on a complaint related to product defects). Please speak to us about this if necessary.
* Information about the manufacturer's warranty
The manufacturer grants a 5-year guarantee throughout Germany on the delivered item Systemceram KeraDomo MERA 24 F. If material or manufacturing defects occur during this period, the manufacturer grants one of the following services of its choice as part of the guarantee:
• Repair of the item Systemceram KeraDomo MERA 24 F in 16 color variants or
• Exchange for an equivalent or new item Systemceram KeraDomo MERA 24 F in 16 color variants (possibly also a successor model).
In the event of a warranty claim, please contact:
Systemceram GmbH & Co. KG
Berggarten 1
56427 Siersheim
Tel: +49 (0) 2623 / 600-10
Fax: +49 (0) 2623 / 600-790
Note:
Your statutory warranty rights towards us remain unaffected. If the purchased item is defective, you can contact us in any case, regardless of whether the warranty case occurs and whether the warranty is claimed or not.
Note for international and cash on delivery orders / Note for orders from other countries:
Due to the transport sensitivity of this item, we can only send shipments abroad or cash on delivery orders on a pallet via a shipping company. In this case, we ask you to contact us before placing your order (Email: info@ascasa.de, Tel. +49 (0) 89 / 9616069-00).
Due to the transport-sensitivity of this article we can only make shipments abroad on a pallet via a trucking company. We ask you to contact us in this case before submitting your order (Email: info@ascasa.de , Tel. +49 (0) 89 / 9616069-00).
