Catalog search

Naber base heater Kickspace KS 500, 6011001

Naber base heater Kickspace KS 500, 6011001

Naber base heater Kickspace KS 500, 6011001

Naber base heater Kickspace KS 500, 6011001
Read more
Vendor code: 6011001
Delivery time: 10-12 days
684.00€

   
Add to cart

For light soiling. Place approx. 400 ml of water and a little washing-up liquid in the cooking space and select the cleaning program. The environmentally friendly cleaning system softens burnt-in residues so that they can then be wiped off much more easily

Naber base heater Kickspace KS 500, 6011001

Product description

  • The base-mounted compact heater for rooms up to approx. 12 m² can be easily connected to the central heating system.
  • Connection values: 230 V / 50 Hz
  • Heating system: exclusively for 2-pipe system
  • Minimum base height: 125 mm
  • Flexible connection hoses with 1/2" screw connection and shut-off valve (not included) ensure problem-free installation and a secure connection to the central heating system.
  • The heating output depends on the flow temperature and the flow rate of the heating system
  • For proper operation, the average Flow temperature should not be below 60° C.
  • Two additional product variants are available:
  • KS 600 (for rooms up to approx. 16 m²) Art. No. 6011002
  • KS 800 (for rooms up to approx. 24 m²) Art . No. 6011019

Technical principle / product features
.

  • The base heater is based on the convector principle of a radiator heater. As a compact and powerful modular heater, it can be easily integrated into the base area of ​​base cabinets .
  • Air is sucked in on both sides of the panel, which is guided over a heating coil and released back into the ambient air as scalable heat in the middle area of ​​the panel using different fan speeds.
  • A special bearing and damping technology for the fan, as well as a flow-optimized design principle, ensure this for almost silent operation of the unit.
  • A performance comparison with a conventional radiator shows that a KICKSPACE unit only needs about half the time to heat up an approximately 12 m² room from an initial temperature of 15° C to a room temperature of 20 ° C.
  • The heat requirement can be controlled specifically using a 2-stage system. In level II, approximately 30% higher heating output is achieved. Level I is absolutely sufficient for normal operation.
  • Fast and effective heating is one of the main advantages of the system. In addition, the selective control of comfortable heat as required is an additional opportunity to specifically and noticeably save energy.
  • Cooling air circulation in summer operation is a welcome additional benefit of KICKSPACE.
  • All you need to install KICKSPACE in the central heating system are two hoses and a mains connection.
  • It is operated either manually via a switch on the front of the panel or automatically via the connection to a room thermostat (not included in the scope of delivery).
  • A stainless steel-colored panel (not included in the scope of delivery) elegantly conceals the robust heating technology and provides protection Damage in the base area.