For light soiling. Place approx. 400 ml of water and a little washing-up liquid in the cooking space and select the cleaning program. The environmentally friendly cleaning system softens burnt-in residues, making them much easier to wipe off afterwards

Special features and general information

• KB 5-year guarantee

  Küppersbusch products meet the highest quality standards. 5 year guarantee on all built-in devices!

• KB cooking surface sensor operation

  Exemplary sensor electronics take over the control of the electronic cooking surfaces: a light tap of the finger on the sensor surface is enough and the desired cooking zone is switched on.
  With the easy-to-use sensor buttons, you can control all other functions in addition to the cooking levels.

• KB-Oeko-Speed-Plus

  All KÜPPERSBUSCH cooking zones have ökospeed plus radiators. These highly developed radiators ensure a heating time in seconds and therefore the fastest possible heat supply. This not only shortens the cooking time, but also saves valuable energy.

• KB Parental Control

  If the Parental Control is activated, the device cannot be switched on unintentionally.

  (sensor lock)
• KB stop-and-go button

  The integrated STOP-AND-GO button offers great safety convenience. With this function button, there will no longer be any unpleasant surprises after the doorbell rings or the telephone suddenly rings, because a tap on the STOP-AND-GO button is enough and all activated hotplates are stopped at the set heat level. When you return, just tap it again to continue the cooking process.

Equipment

• 9-stage power control “dialControl” with red display
  
• Automatic warm-up
  
• Cooking zone heat indicators
  
• Minute minder with switch-off function
  
• Central shutdown
  
• Holiday switching (operating time limitation)
  
• 1 cooking zone Ø 155 mm / 1,200 W
  
• 1 cooking zone Ø 190 mm / 1,800 W
  
• 1 dual-circuit cooking zone Ø 220 mm or 145 mm / 2,200 or 1,000 W
  
• 1 dual-circuit cooking/frying zone Ø 180 mm or 275 x 180 mm / 2,400 or 1,500 W

Technical data

• Connected load 7.6 kW
  
• Device dimensions W x D approx. 798 x 518 mm
  
• Installation height 44 mm
  
• Cut-out dimensions W x D approx. 750 x 490 mm

Note

• for flush installation, please note the dimensional drawing
• VarioLine: only applies when used with special accessories ZK 0800 (only possible when using stainless steel frame profiles)

* Information about the manufacturer’s warranty