For light soiling. Place approx. 400 ml of water and a little washing-up liquid in the cooking space and select the cleaning program. The environmentally friendly cleaning system softens burnt-on residues, making them much easier to wipe off afterwards

General information about the berbel ceiling lift hood - Skyline Edge Light

Special features:

• berbel principle

  The berbel principle: WITH CENTRIFUGAL FORCE, WITHOUT FAT FILTER.
  

  According to a patented process, berbel uses the physical power of the centrifuge.
  

  • First, the vapors are sucked in through a narrow but extremely effective gap.
    
  • At the hood inlet, the air is then accelerated strongly and deflected in an arc in two directions. The resulting centrifugal force throws the fat particles out of the air and separates them quietly and effectively instead of filtering them. More than 90% of the fats are caught in the hood in the first step, so the air can move on unhindered.
    
  • In the middle part is the residual separator - the Capillar Trap (equipment depends on the model). Thanks to the vertical arrangement and the perforated structure, even the finest residual particles - the last 3 to 5 percent - are captured. It is easily removable and can be cleaned in the dishwasher every 6-6 weeks.
    

  THE MOST EFFECTIVE AIR PURIFICATION SINCE THERE WAS EXTRACTOR HOODS - WITH CENTRIFUGAL POWER, WITHOUT GREASE FILTER.
  

  to the video
  
• berbel-LED

  The berbel LED lighting is characterized by very low energy consumption, high efficiency and longevity. Perfect hob illumination is achieved by optimally positioning the lighting in the hood body. The LEDs used by berbel have a color temperature of 3,500K - this corresponds to the light color warm white.

  
  
• berbel-Hygiene

  Simply open, wipe, clean. The separated fat collects in the stainless steel drip trays, which are particularly easy to clean. Depending on the type of hood, the high-quality grease drip trays can be easily opened for cleaning and some can even be completely removed and thus easily cleaned in the dishwasher.

• berbel teach function

  With the new teach function, the hood automatically stops at the optimal level Working height and unfolds its full effect there.

• berbel remote control

  berbel extractor hoods are compatible with the BFB remote control. Some berbel extractor hoods require retrofitting. Retrofitting requires service or conversion of the hood control.

• berbel glass decor individually

  Select your individually desired RAL color, then the glass surfaces will be made of high-quality safety glass with either tinted or back-painted glass, depending on the hood type, especially for you .

  
  
• berbel KNX-RF module

  integration into modern home automation with the berbel KNX-RF module
  The berbel KNX-RF module enables the integration of berbel Skyline models into modern home automation. The KNX standard enables devices to be networked and operated via a standardized BUS system. Due to the comprehensive standard, KNX offers the highest level of security.
  
  The following functions of the Skyline models can be controlled via KNX-RF technology:
  
  - Control of the fan levels (1/2/3/P)
  - Effect lighting (on/off)
  - Hob lighting (on/off)
  - Drive (up/down) or EcoSwitch (recirculation/exhaust air).
  
  The easiest way to integrate into KNX is to control the functions via a KNX radio switch.
  If, for example, ComingHome functions are set when putting together the KNX system, the lighting of the Skyline model can be switched on centrally. This is particularly useful wherever the hood is planned as a light source and needs to be switched on centrally. Thanks to the uniform standard, there are countless possible applications when combining functions with other sensors such as a KNX LUX, CO2 or mixed gas sensor. The berbel KNX-RF module must be installed at the factory when ordering the hood.

  optional (must be integrated into the hood at the factory. Please select when ordering)
• Height adjustability up to 1200 mm
  
• User-friendly remote control
  
• Glare-free, long-lasting LED hob lighting with adjustable color temperature from 2,700 to 6,500 Kelvin
  
• Atmospheric room ambience thanks to additional effect lighting
• Extremely quiet and energy-saving with the new berbel EC motor

  The EC motor (electronic communicated) is an electromechanical converter that converts electrical energy into mechanical energy. EC motors are used in extractor hoods as particularly energy-saving, long-lasting and quiet motors.

• The drip tray can be completely removed and therefore easy to clean
  >

Planning information:

Included in delivery:

Special equipment (please select the special equipment at the top right, next to the article image):

• berbel sloping ceiling console: 1050089 - Please indicate the required angle in terms of number of degrees and direction in the comments field during the ordering process ("Ceiling console" option)
  
• berbel slanted and colored ceiling console according to RAL colors: - please specify the desired RAL color in the comments field during the ordering process (option "ceiling console")
• berbel rope extension

  rope length can be individually extended for high rooms. Hood floats under the ceiling at the height of the cable extension.

  : 1050086 incl. power cable (option "cable extension")
• berbel ceiling connection - please choose between "berbel ceiling connection with glass cladding

  You can add modern accents in black or white the optional glass paneling for the ceiling connection.

  ", " berbel ceiling connection with glass paneling and integrated ceiling moodlight

  With the integrated ceiling moodlight, which is controlled via the light switch on the ceiling burner, you can immerse your kitchen in an atmospheric light.

  ", " berbel ceiling connection with fully retractable

  Always there when you need it, but still invisible. With this ceiling connection your hood retracts flush with the ceiling and disappears into the ceiling box.

  " (“Ceiling connection” option)
• berbel AutoRun module

  As if by magic, the berbel extractor hood starts automatically when you switch on the hob. The fan starts automatically at level 3, the hob lighting bathes the cooking zone in a pleasant working light. The berbel AutoRun module is connected between the power connection and the hob. It detects when the hob is switched on and starts the extractor via a Bluetooth connection. During the cooking process, the hood can be controlled with all functions as usual using the remote control. When you switch off the hob, the hood switches to the run-on function and then switches off. The Autorun module is available for all berbel ceiling lift hoods and can be combined with all power-operated, self-sufficient hobs, regardless of manufacturer.

  Scope of delivery:

  • AutoRun module
  • Set of connection cables
  • Preparation for BDL hood with corresponding circuit board

  Planning information:

  • Installation is surface-mounted between the power connection and the hob supply line, installation may only be carried out by qualified personnel
  • Can be combined with all high-current hobs
  • Not a retrofit item, as the extractor hood must be equipped with the corresponding receiver module

  for automatic control of the hob (individual accessory option)
• berbel Smartphone control (app operation-BDL) and berbel RGB lighting hood - these options cannot be retrofitted! (Individual accessory option)