For light soiling. Place approx. 400 ml of water and a little washing-up liquid in the cooking space and select the cleaning program. The environmentally friendly cleaning system softens burnt-on residues, making them much easier to wipe off afterwards
New Ergoline 2 headroom hood
Thought out down to the last detail
Standard equipment
- Highest vapor vapors
Cooking and frying vapors are referred to as vapors, vapor vapors or steam. They are composed of air, water and fat.
-Detection efficiency thanks to innovative berbel back-flow technologyWith slanted glass decorative hoods, the collision of hot water vapor on the cold decorative surface can lead to unsightly condensation or even the formation of drops. The patent-pending back-flow technology knows how to prevent this by aerating the decorative pane from bottom to top. Part of the air volume is returned to the back of the hood and guided over the glass front. This secondary ventilation means that the decorative surface always remains free of condensation and the mist vapors are directed even more specifically into the intake gap. For particularly high vapor capture efficiency and extremely effective air purification.
- Efficient and permanently consistent fat separation with the powerful berbel principle
- berbel fine particle catcher “Capillar Trap” with improved grease separation
- Extremely quiet and energy-saving thanks to the new berbel EC motor
The EC motor (electronic communicated) is an electromechanical converter that converts electrical energy into mechanical energy. EC motors are used in extractor hoods as particularly energy-saving, long-lasting and quiet motors.
as standard - New front hinge connection with integrated damping system, for comfortable opening and closing of the flap
- Innovative, removable drip trays and a perfectly finished interior for easy cleaning
- Patent-pending BackFlow technology for maximum vapor capture efficiency and condensate-free glass decorative surfaces
- Dimmable LED hob lighting with adjustable color temperature, conveniently controllable via the control bar
- Atmospheric, indirect rear wall lighting with LEDs
- Ultra-modern berbel EcoSwitch
The special berbel EcoSwitch technology allows you to flexibly choose between recirculation and exhaust air mode of a berbel extractor hood at any time: In exhaust air mode, the air is led outside through the automatically opening wall box. In recirculation mode, the wall box remains closed and the air is cleaned by recirculation. This is made possible by an intelligent overall system consisting of a berbel hood with an activated carbon filter as a hybrid version and an active berbel wall box. This means you can flexibly switch to the appropriate mode depending on the cooking or weather situation by touching the sensor touch control panel.
-Control
Special equipment (selectable):
- Maintenance-free recirculation mode with the regenerative recirculation filter permalyt®, the commercially available one The active hole filter is replaced by a permalyt filter, which is characterized by very good filter performance and generates the advantage of being maintenance-free
- Chimney extension possible up to 1,840 mm
- Side outlets for exhaust air operation in round or square
- Conversion to remote control for barrier-free use
Technical data
- Width: 60cm
- Energy efficiency class A
- Annual consumption: 36.4 kWh
- Lighting efficiency class: A
- Grease separation level class: B
- Sound pressure level 3: 48 (dB(A) re 20 µPA)
- Sound power level 3: 60 (dB(A) re 1 pW)
- Power levels: 3 + power level (P)
- Fan power, free-blowing: 630 m3/h
- Fan power consumption: 170 W
- LED: 12.7 W
- LED hob illumination: 390 LUX
- Pipe connection: 1.5 cm Ø
- Net weight: 27 kg
- Run-on function for recirculation mode: configurable automatic
Equipment features:
With the berbel recirculation technology, the air is optimally prepared according to the berbel principle, fat-free and led back into the room almost odorless. Since there are no exits to the outside, the room heat is retained 100%. berbel recirculation technology is ideal for houses according to the latest energy standards (EnEV), apartment buildings, old buildings, for complicated exhaust air ducts or for safety in fireplaces with open fireplaces.
Exhaust air plays a relevant role in all extractor hoods. The cooking fumes are led out of the house through generously sized pipes (at least 125 mm or 150 mm diameter - standard today). The connection of the pipe to the outside should be completed with a motorized wall box that closes the hole in the outer wall of the building. This results in an effective and energy-saving exhaust system. The berbel wall box is only open when the hood is in operation and is thermally insulated when closed. This minimizes heat loss and protects you from drafts. The special berbel exhaust pipes do not have any sharp edges or kinks or curves that slow down performance. In combination, you benefit from a flow-optimized overall system for particularly quiet and efficient air purification. The berbel exhaust air technology is recommended for new buildings, for retrofitting in all houses or for increasing the efficiency of existing kitchens. This is often assumed - but there is no legal ban on an exhaust hood in passive or low-energy houses. All you have to do is ensure that there is enough supply air, e.g. via an open window or other supply air solutions, which should be in line with any existing living room ventilation system.
The device sucks in room air, cleans the room air and removes part of the cleaned room air to the outside. The remaining part of the air sucked in is directed back into the room through the hybrid filter. Cleaning takes place in several cleaning stages. The majority of dirt particles, such as grease and oil particles from the sucked-in room air, are collected in the lower grease tray. While part of the cleaned room air is directed outside, the filter filling in the hybrid filter neutralizes any odors present in the remaining amount of sucked-in air. This odor-free, purified room air is returned to the room.
Info: The filter filling must be replaced regularly.
can be installed
